Lighting equipment for heliports

Reference information on the layout of lighting equipment


Огни для вертодрома
Серия огней ОВП-2 для вертодромов с питанием ~220В.

Cоответствует международным стандартам:
- ICAO: Annex 14 Volume II § 5.3.8
- FAA: AC 150/5390-2B.

Достоинства:
- Низкое энергопотребление
- Высокая надежность изделия
- Имеет различные типы креплений
- Фотометрия в соответствии со стандартами ICAO Annex 14 Appendix 2


Характеристики:
- Температурный режим от -50°С до +50°С
- Относительная влажность 98% при +25°С
- Напряжение питания ~220 В
- Потребляемая мощность 7 Вт
- Источник света - 1 светодиод
- Время наработки светодиодов более 50'000 часов
- Климатическое исполнение О1
- Степень защиты IP67
- Средний срок службы 10 лет
- Гарантийный срок 24 месяца


Прайслист серии огней ОВП-2

Прайслист серии огней ОВП-2 (с байонетным креплением)

Omnidirectional light touchdown and lift-off area – TLOF (green).

Complies with international standards:
- ICAO: Annex 14 Volume II § 5.3.8
- FAA: AC 150/5390-2B.

Benefits:
- Low energy consumption
- High reliability of operation
- Various types of installation fixtures
- Safe power supply
- Photometry complies with ICAO Annex 14 Appendix 2 standards


Specifications:
- Operating temperature: from -50°С to +50°С
- Relative humidity: 98% at +25°С
- Power supply voltage =48 V
- Power consumption: 7 W
- Light source – 1 LED
- LED service life is over 50,000 hours
- Designed for operation in all climate
- Ingress protection rating IP67
- Average service life is 10 years
- Warranty period is 24 months


ALLG-W6/12x360  User manual - TLOF light (green)

ALLG-W6/12x360  characteristics - TLOF light (green)

TLOF omnidirectional light for heliport
FATO omnidirectional light for heliport
Omnidirectional light final approach and take off area – FATO (white).

Complies with international standards:
- ICAO: Annex 14 Volume II § 5.3.6
- FAA: AC 150/5390-2B.

Benefits:
- Low energy consumption
- High reliability of operation
- Various types of installation fixtures
- Safe power supply
- Photometry complies with ICAO Annex 14 Appendix 2 standards


Specifications:
- Operating temperature: from -50°С to +50°С
- Relative humidity: 98% at +25°С
- Power supply voltage =48 V
- Power consumption: 8 W
- Light source – 1 LED
- LED service life is over 50,000 hours
- Designed for operation in all climate
- Ingress protection rating IP67
- Average service life is 10 years
- Warranty period is 24 months


ALLC-W6/12x360  User manual - FATO light (white)

ALLC-W6/12x360  characteristics - FATO light (white)

Omnidirectional light, Landing direction light – (white).

Complies with international standards:
- ICAO: Annex 14 Volume II § 5.3.6
- FAA: AC 150/5390-2B.

Benefits:
- Low energy consumption
- High reliability of operation
- Various types of installation fixtures
- Safe power supply
- Photometry complies with ICAO Annex 14 Appendix 2 standards


Specifications:
- Operating temperature: from -50°С to +50°С
- Relative humidity: 98% at +25°С
- Power supply voltage =48 V
- Power consumption: 18 W
- Light source – 3 LEDs
- LED service life is over 50,000 hours
- Designed for operation in all climate
- Ingress protection rating IP67
- Average service life is 10 years
- Warranty period is 24 months


ALLC-3*W6/12x360  User manual - landing direction light (white)

ALLC-3W6/12x360  characteristics - landing direction light (white)

Landing direction light
TLOF flood light for heliport
Flood light for TLOF.

Complies with international standards:
- ICAO: Annex 14 Volume II

Benefits:
- Low energy consumption
- High reliability of operation
- Various types of installation fixtures
- Safe power supply =48 V
- Large lifespan of the light source: over 50,000 hours


Specifications:
- Operating temperature: from -50°С to +50°С
- Relative humidity: 98% at +25°С
- Power supply voltage =48 V
- Power consumption: 40 W
- Light source – 7 LEDs
- Designed for operation in all climate
- Ingress protection rating IP67
- Average service life is 10 years
- Warranty period is 24 months


ALLC-7*W6-Flood  User manual - flood light for TLOF

Heliport beacon.
The beacon is intended for a long-distance visual detection of the helipad and its identification in the area of strong light from the adjacent lighting systems.

Complies with international standards:
- ICAO: Annex 14 Volume II § 5.3.2

Benefits:
- Low energy consumption
- High reliability of operation
- Various types of installation fixtures
- Safe power supply = 48 V
- Large lifespan of the light source: over 50,000 hours
- 5 independent light sources in the beacon body


Specifications:
- Operating temperature: from -50°С to +50°С
- Relative humidity: 98% at +25°С
- Power supply voltage = 48 V
- Average Power consumption: 25 W
- Pulse power: 500 W
- Light source – 50 LEDs
- Designed for operation in all climate
- Ingress protection rating IP67
- Average service life is 10 years
- Warranty period is 24 months



"THE HARD CORN"  User manual - Heliport beacon
Heliport beacon
Мачта для установки вертодромного маяка
Beacon mast.
This mast is intended for beacon mounting on height in cases when the helipad has no buildings and structures to make the beacon visible from all sides and avoid the pilot dazzling during final approach.


Drawing. Beacon mounting mast
User manual. Beacon mounting mast
Support for LS light.
It is designed for installation of LS elements on the ground. The support is made of 50x50 mm steel angle, 750 mm long, coated with yellow powder paint, complete with a 200 mm high stand. LS light mounting bracket is used to mount the light on the pipe.


User manual
Support for LS light "Needle"
Стойка "Игла"
Pyramid for TLOF/FATO light
Pyramid for LS light.
It is designed for installation of LS elements on solid basement or on the ground. This pyramid is made of polycarbonate, bulk painted in yellow (RAL1003), UV-proof paint. To mount the lights, a bayonet lock is used, located at the top of the pyramid.

User manual
Support for LS light "Pyramid 250"
LS pyramid base for concrete.
It is intended for installation of the pyramid on concrete. The pit is made of steel and painted with protective coating.
Base for pyramid on concrete
Base for pyramid on ground
LS pyramid base for ground.
It is intended for installation of the pyramid on ground. The pit is made of plastic with installed steel fixing angles.
Signal pole.
Signal pole is intended to indicate the location of the lights in winter conditions with snow drifts to facilitate their cleaning.

Signal pole
Temporary helipad sign

Banner for marking of temporary helipad TLOF zone.
The banner allows quick and visible marking of the touchdown-liftoff temporary zone when a lot of helicopters are expected to land on the ground.
Dimensions: 1,500 mm х 1,500 mm
Complete with 8 mounting pegs.


Banner use video

Documentation

Certificates and Test reports

Registration and operation of lighting and weather equipment




Политика обработки персональных данных. Ваши персональные данные обрабатываются на сайте в целях его функционирования - если вы не согласны с этим, то должны покинуть сайт.