Obstacle and taxiway lights, marking
|
Flags used for marking of unpaved runways, taxiways and aprons.
Comply with:
- Federal Aviation Rules-69
Specifications:
- Flag width – 500 mm
- Flag height – 400 mm
- Flagpole height – 1,000 mm
- Flagpole material – aluminium
- Tip and butt of flagpole – stainless steel
- Flag material – Polyester
- Flag color – white, black, red (orange), blue
User manual
Flags used for marking of unpaved runways
Marking of unpaved runways
|
Low-intensity omnidirectional obstacle light, Type-А (red color).
Comply with international standards:
- ICAO: Annex 14, Volume I, Table 6-3. Characteristics of obstacle lights
- FAA: AC 150/5390-2B.
Benefits:
- Low energy consumption
- High reliability of operation
- Various types of installation fixtures
- Safe power supply
- Photometry complies with ICAO Annex 14 Appendix 2 standards
Specifications:
- Operating temperature: from -50°С to +50°С
- Relative humidity: 98% at +25°С
- Power supply voltage = 24-48 V
- Power consumption: 6.5 W
- Light source – 3 LEDs
- LED service life is over 50,000 hours
- Designed for operation in all climate
- Ingress protection rating IP67
- Average service life is 10 years
- Warranty period is 24 months
ОВП-С-04/48-К/К
low-intensity obstacle light, Type-А (red color)
ОВП-С-04/48-К/К characteristics
|
|
|
Low-intensity omnidirectional taxiway light (blue color).
Comply with international standards:
- ICAO: Annex 14 Volume II § 5.3.10, Volume I § 5.3.17
- FAA: AC 150/5390-2B.
Benefits:
- Low energy consumption
- High reliability of operation
- Various types of installation fixtures
- Safe power supply
- 1 light source in one device
- Photometry complies with ICAO Annex 14 Appendix 2 standards
Specifications:
- Operating temperature: from -50°С to +50°С
- Relative humidity: 98% at +25°С
- Power supply voltage =48 V
- Power consumption: 2 W
- Light source – 1 LED
- LED service life is over 50,000 hours
- Designed for operation in all climate
- Ingress protection rating IP67
- Average service life is 10 years
- Warranty period is 24 months
ОВП-С-03/48-С/С manual - taxiway light (blue)
ОВП-С-03/48-С/С characteristics - taxiway light (blue)
|
ICAO Appendix 14. Volume 1 – "Aerodromes".
6.3 Lighting of objects
Use of obstacle lights
6.3.1 The presence of objects which must be lighted, as specified in 6.1, shall be indicated by low-, medium- or
high-intensity obstacle lights, or a combination of such lights.
Note.— High-intensity obstacle lights are intended for day use as well as night use. Care is needed to ensure that these
lights do not create disconcerting dazzle. Guidance on the design, location and operation of high-intensity obstacle lights is
given in the Aerodrome Design Manual (Doc 9157), Part 4.
6.3.2
Recommendation.— Low-intensity obstacle lights, Type A or B, should be used where the object is a less
extensive one and its height above the surrounding ground is less than 45 m.
6.3.3
Recommendation.— Where the use of low-intensity obstacle lights, Type A or B, would be inadequate or an early
special warning is required, then medium- or high-intensity obstacle lights should be used.
5.3.17 Taxiway edge lights
Application
5.3.17.1 Taxiway edge lights shall be provided at the edges of a runway turn pad, holding bay, de-icing/anti-icing facility,
apron, etc., intended for use at night and on a taxiway not provided with taxiway centre line lights and intended for use at night,
except that taxiway edge lights need not be provided where, considering the nature of the operations, adequate guidance can be
achieved by surface illumination or other means.
5.3.17.2 Taxiway edge lights shall be provided on a runway forming part of a standard taxi-route and intended for taxiing
at night where the runway is not provided with taxiway centre line lights.
Note.— See 8.2.3 for provisions concerning the interlocking of runway and taxiway lighting systems.
Location
5.3.17.3
Recommendation.— Taxiway edge lights on a straight section of a taxiway and on a runway forming part of a
standard taxi-route should be spaced at uniform longitudinal intervals of not more than 60 m. The lights on a curve should be
spaced at intervals less than 60 m so that a clear indication of the curve is provided.
Note.— Guidance on the spacing of taxiway edge lights on curves is given in the Aerodrome Design Manual (Doc 9157),
Part 4.
5.3.17.4
Recommendation.— Taxiway edge lights on a holding bay, de-icing/anti-icing facility, apron, etc., should be
spaced at uniform longitudinal intervals of not more than 60 m.
5.3.17.5
Recommendation.— Taxiway edge lights on a runway turn pad should be spaced at uniform longitudinal
intervals of not more than 30 m.
5.3.17.6
Recommendation.— The lights should be located as near as practicable to the edges of the taxiway, runway turn
pad, holding bay, de-icing/anti-icing facility, apron or runway, etc., or outside the edges at a distance of not more than 3 m.
Characteristics
5.3.17.7 Taxiway edge lights shall be fixed lights showing blue. The lights shall show up to at least 75° above the
horizontal and at all angles in azimuth necessary to provide guidance to a pilot taxiing in either direction. At an intersection, exit
or curve the lights shall be shielded as far as practicable so that they cannot be seen in angles of azimuth in which they may be
confused with other lights.
5.3.17.8 The intensity of taxiway edge lights shall be at least 2 cd from 0° to 6° vertical, and 0.2 cd at any vertical angles
between 6° and 75°.
|
Truncated cone MAK-800 for marking of the runway and unpaved helipad.
Comply with FAR-69 (Russia):
- Annex №2
Benefits:
- High anti-corrosion protection (zink galvanized metal)
- Ground mount included
Characteristics:
- Operating temperature: from -60°С to +50°С
- Relative humidity: 98% at +25°С
- Average service life is 10 years
- Warranty period is 24 months
|
Runway entry marker МВЗ-490 for marking the beginning and end of the runway.
Comply with FAR-69 (Russia):
- Annex №1
Benefits:
- High anti-corrosion protection (zink galvanized metal)
- Ground mount included
Characteristics:
- Operating temperature: from -60°С to +50°С
- Relative humidity: 98% at +25°С
- Average service life is 10 years
- Warranty period is 24 months
|
|
Certificates and Test reports
